Skip to main content

Tag: range

Product review: MAE 6-30 ST Suppressor

Geoff 5 Comments

Before the NZDA Prize Shoot earlier this month, I was lucky enough to get my hands on a brand new suppressor from MAE. I didn’t get a chance to shoot with it before the day, so I must admit I was a bit nervous – but it was well worth it in the end.

MAE

MAE are a New Zealand suppressor manufacturer, based out of East Tamaki in Auckland. These guys are not only part of what keeps New Zealand’s shooting community ticking, but they are able to actively engage with their customers to discover new needs and develop better products. Some of the models and cutaways that I saw at the shop were incredibly impressive – include a suppressor that tightens itself on the thread as you fire.

Suppressors in New Zealand

Unlike the USA, suppressors can be had without any legal hoopla or extra taxes. They are seen as practical accessories that improve the shooting experience, control noise on the range or farm, and make it easier to destroy pests or hunt game.

Suppressors help to reduce felt recoil, as well as decibel levels.
Suppressors help to reduce felt recoil, as well as decibel levels.

There are many – many – types of suppressors on the market, include muzzle forward (muzzle cans), over-barrel (reflex) or full-barrel (integrated). There are many produced here, and as much come in from overseas. Price-wise, you can expect to pay anything between $300 and well over $1000 for a centrefire suppressor. A decent rimfire silencer can go for as little as $55 on Trademe, and up to a couple hundred bucks if you want better performance. Again, the more you spend, the more you get. I have seen some impressive .22LR setups with full-barrel or over-barrel suppressors.

6-30 ST Muzzle Can

The 6-30 ST suppressor is the cheapest (brand new) centrefire suppressor I have seen in New Zealand recently. Don’t let this fool you though – it’s damn good.

presentation17

The positives

  • It does what it says. This suppressor greatly reduces felt recoil and muzzle climb. It was infinitely easier to shoot with this suppressor fitted, especially with a light (and short) stock. For modern hunting rigs in large calibres and light stocks, one of these should be on your radar.
  • It’s a solid unit. Literally. It doesn’t come apart for cleaning and is joined at the muzzle end with some very neat TIG welding. This means there are no bits to lose or break.
  • Long life expectancy. With a 5000 round minimum service life according to MAE, you can expect this suppressor to last as long as the barrel on your rifle. For the price, it’s definitely worth it.
  • Solid stainless. The 304 stainless means it’s heavy as hell, and you certainly notice the balance shift. However, the heavy material absorbs more sound and makes for a more solid unit. The 304 will also be less prone to corrosion than other materials. For a range rig, this is ideal. For a hunting rig, you may want something that reflexes over the barrel to spread the weight a bit better. MAE offers a 5 year warranty, so you know they’re built like a brick sh…
  • The price. At $250 for the stainless finish or $290 for the matte black, it’s the cheapest you’ll find on the market (at least as far as I can see).
  • The versatility. If you have multiple rifles with the same thread but in different calibres, this silencer is for you. Good for anything between 6mm and right up to the 300 magnums, you can have one suppressor for your rifle, your partners, and the three she doesn’t know about.
The suppressor is built for anything between 6mm and .300 RUM. The 6.5x55 above shows how much room there is left over.
The suppressor is built for anything between 6mm and .300 RUM. The 6.5×55 above shows how much room there is left over.

The negatives

  • Weight. Although I like the weight of this unit, at almost half a kilo, it could be off-putting for those after a bush-ready rig. If you want a long-range shooter or a tactical sniper set-up, then this won’t deter you at all.
  • The price. Some people just don’t feel like they’re getting a good product unless they have to have their wallet surgically removed through their nose. In my opinion, this suppressor does what much more expensive ones do (without skipping a beat), at a much lower price. If this bothers you, I imagine your gun safe is full of some pretty expensive stuff. If you do want to spend more money, I’m sure MAE will have something to fit the bill.
  • Um…… I can’t think of anything else to be honest.

Range shooting

I must admit, I had a pretty poor shoot at the NZDA, but that was me, not the rifle. However, the one thing I did get out of the day was an immense satisfaction with my new suppressor, as well as the BOLD Trigger from Boyds Gunstocks.

The brushed stainless finish stands out and looks great. Although, for hunters a matte black would be better.
The brushed stainless finish stands out and looks great. Although, for hunters a matte black would be better.

I chose to leave my suppressor as brushed stainless. Not only did it keep the cost down, but it looks cool with my rifle and the other polished metal bits on it (the Mauser-style extractor and the cocking piece). Having had a look at the paint MAE use (Gun Kote 2410F), I knew I had a pretty good match at home if I wanted to paint it myself later. In fact, it would then perfectly match my barrel which I did with the same paint.

The 6.5×55 is a pretty mild-recoiling round, however, in the short, light-weight stock mine is in, it has quite a kick. Not enough to make it uncomfortable to shoot, but after 50 rounds, you’d definitely feel it. The first thing I noticed was an immense reduction in recoil. Not only does this get rid of the instinctual flinch you might develop over time, but it means you are right on target for your next shot. Previously I would find myself pointing two targets over to the left after each shot.

Shooting amongst a bunch of bare-barrel .308s and .223s all day, I could certainly notice (and appreciate) the significant reduction in noise from my old Swede. Ross, whom I shoot with regularly at the Howick Smallbore club, remarked several times throughout the day that he was incredibly impressed with how quite my gun was – he was sitting next to me and expecting a pretty big blast. Another shooter from our club noted that the rifle sounded “pretty cool” – which I must admit, it did. If you play Battlefield 4, you’ll know what I’m talking about. I was even approached by a complete stranger who said he would love to get one himself.

With the grand sacrifice of $250, and a little weight on the end of my rifle, I improved my shooting experience greatly. And the rifle did do really well on the day in the end, as my wife placed top of Division B with it.

Some caveats

When I got my suppressor I was given two bits of advice. Firstly, use a lubricant on the threads to ensure you can get it off after you shoot (nickel-based is good, copper-based is bad). Secondly, take the suppressor off after you shoot, or the stainless will attack the barrel.

Anyone who is familiar with the concept of sacrificial metals will quickly grasp that last one. I would just add one last piece of advice. The burnt powder and gunk that is on the crown of the barrel when you remove the suppressor – wipe this off immediately. I waited until I got home and cleaned my rifle, and it had hardened and become very difficult to remove.

My overall opinion is that this is a product which will help you enjoy shooting more – especially larger calibres, and will improve your accuracy. If those are two things you would like to do, and at a reasonable price too, then this is the suppressor for you.

Check out MAE.nz for more of their range.

Auckland NZDA Prize Shoot

Geoff Leave a comment

The annual NZDA Auckland branch Prize Shoot is a great day out for Auckland shooters of all abilities. Falling in September each year, the weather can be a bit hit and miss, but aside from that, it’s a perfectly pleasant day on the range with your favourite rifle and some mates.

This year – the 46th Prize Shoot – I shot for my second time and my wife completed her first centrefire competition. We both did fairly well, but she truly excelled. I’ll claim that it’s because I sighted the rifle in through my shooting (we shared a rifle). However, all credit to her, as she outshot some great shooters.

The field

That’s another thing that makes the day enjoyable – there are shooters of all abilities. I placed well ahead of some very experienced shooters, but was beaten by someone shooting for their first time ever. And vice versa. It really is a great field of competitors, where everyone can benchmark their performance against others.

NZDA 100 metre standing shoot
100 metres is more than enough from the standing position.

At the top of Division A were the usual suspects, including Paul Carmine. My wife, Kassie, took out Division B – which got her called up second in the order of prize recipients, allowing her to choose a really nice Hunting and Fishing backpack for her prize.

This year there were four ladies and two junior shooters. In total, there were just under 40 shooters, making up two details. Last year there were around 60 shooters (despite the inclement weather), and apparently previous years have had a similar turnout. Perhaps timing a competition to coincide with Bathurst wasn’t the best move…

The format

The format of the shoot is very simple and easy to follow. Once the safety instructions and competition rules had been read out, the first detail (Squad A) went to the mound for sighting in and the prone target shoot.

Rest and bipods are allowed for sighting in, however, you want tomake sure you're sighted in before competition day if possible.
Rest and bipods are allowed for sighting in, however, you want to make sure you’re sighted in before competition day if possible.

Sighting in is done on a target on the right hand side of the frame, and five minutes are allowed for unlimited sighters.  The range for the competition is 100 metres. I got 13 rounds off in this time, trying to get my rifle on point. The lesson here being to always sight your rifle in before competition day if you’ve done some work on it. After 13 rounds, there was a decent amount of mirage created by the heat of the barrel and my new MAE suppressor. However, by taking my time this didn’t affect my prone shoot.

You can use a rest or bipod to sight in, however the rest of the competition is shot without any aids (aside from a shooting mat and a kneeling roll).This means no slings, jackets or gloves.

The prone shoot is 5 shots in 7 minutes – plenty of time. After this is finished and the rifles are cleared and removed from the mound, scorers go forward to retrieve targets. Squad B is next, but in the meantime, people stand around chatting and enjoying the all-day sausage sizzle.

After Squad B, the same process is followed and Squad A goes up for 5 rounds in the kneeling position, also in 7 minutes. Rinse and repeat for Squad B. The last shoot of the day is 5 rounds standing, again in 7 minutes. This is what separates the men from the boys. Some of those scoring in the 40’s in the prone event struggle to scrape 20 together in the standing position.

In between these, there is a 5 round rapid shoot on the 25 metre range, to be completed in 40 seconds. Again, making sure you know your hold under/over and your parallax settings before competition day is invaluable. If you’re sharing a rifle with your partner or buddy, you will be accommodated with an extra rapid at the end – although you’ll probably have time in between while targets are retrieved and people yack on about how they pulled that one shot. Targets are also given out once scored, so there is plenty to talk about during the day.

The rifles

Generally speaking, the rifles are hunting rifles in hunting calibres. There are some rifles that would look more at home in an F-Class shoot, and some that would be quite comfortable in the lineup for a military service rifle shoot. The most exotic calibre of the day was probably .310 Cadet, with one .22 Hornet and a 6BR making an appearance.

As far as I could see, the only semi-auto was a Norinco M305 (the Chinese version of the M14), whereas last year a couple AR-15’s placed very highly in the field. At the 2014 Prize Shoot I did take an SKS – what a mistake. The iron sights had not been sighted in and after I took the muzzle brake off, the scope’s zero was so off that I wasn’t on the paper. It was an exercise in frustration, and using the iron sights and a whole lot of compensation, I managed to get some scoring shots in the kneeling and standing events.

This year I went armed with my 1943 Husqvarna M38, chambered in 6.5×55. This rifle was sporterised when I got it, and has since been modified even more. Over the last ten or so months it has a new matte black coating applied, the bolt has been replaced and the cocking piece cut down to reduce lock time. I’ve also installed a Vortex Diamondback BDC 4-12 x 40, and a new adjustable BOLD Trigger, which was kindly supplied by Boyds. Completing the setup was a brand new MAE suppressor, which thoroughly impressed my shooting buddies as well as those that heard it perform.

I also have a new Boyds Gunstock waiting to be fitted to this rifle, but I didn’t want to rush the bedding and finishing before this shoot. It should be ready before the 300m Swiss Club shoot in November. And I’ve learnt my lesson – sight in beforehand!

The load I was shooting was as follows:

Projectile: SMK HPBT 142 gr
Powder: ADI AR2208 34.7 gr
Brass: PPU (twice fired)
Primer: Federal Gold Medal Large Rifle Match

Aside from my wife and I, there was one other person shooting 6.5×55. The most common calibre by far was  .223 Remington, with 14 shooters using this round. There was one .243 and three .270s, with eight .308 rifles as well. The winning rifle was a .222. There were also four other rifles in this calibre on the day, two placing very low in the field and the other two coming in near the top.

The MAE suppressor cut down felt recoil and the loud crack of the rifle, making it a pleasure to handle.
The MAE suppressor cut down felt recoil and the loud crack of the rifle, making it a pleasure to handle.

The prizes

The prizes for the shoot are kindly donated by several sponsors, including major Auckland gun stores, as well as private individuals and club members. Also on offer was a one-year membership to the club, as well as a couple magazine subscriptions.

There were some great prizes to be had, including four of these Leupold knives.
There were some great prizes to be had, including four of these Leupold knives.

Dotted along the prize table were all sorts of cool items for the garage, range, shed, field or bush. Ranging from knives and a machete to ammunition, books, cleaning products, car accessories and even a leather-working voucher.

Everyone walked away happy, having picked a prize that was probably worth more than the $25 they paid to enter the competition. With free sausages all day, and a lot of shooting to do, it adds up to a very worthwhile day.

With the prizes on display all day, everyone eyes up what they want, and probably spend a fair bit of time vacillating between equally awesome prizes. Last year the knives were first to go, however this year they stuck around for a bit. There were a fair few on offer, and myself and two other members of HSSRC managed to score three out of the four limited edition Leupold hunting knives. The first place junior made a bee-line for the machete, which was clearly something he’d been eyeing up all day.

Whether you only break out the centrefire rifles a few times a year or you regularly enjoy taking your hunting rig out, the NZDA Annual Prize Shoot is a rewarding experience in more ways than one, and is something I’d definitely recommend.

Service rifle shoot at Waiuku

Geoff 2 Comments

I’ve never had good luck with a shoot at Waiuku. I’ve been to the range twice before and both times been hit torrential rain and gales, making shooting uncomfortable, if not impossible. Well, third time was the charm as I attended the Waiuku service rifle shoot this Saturday past.

Firstly, let me say that Waiuku has great facilities that enable a wide range of shooters to enjoy themselves. It’s also one of those rare clubs where pistol, rifle and shotgun are all welcome. However, I’ll leave a review of the range for another post. For clarity’s sake, this isn’t the same Waiuku range were ASRA does their winter shooting (The Farm).

On to the shoot itself. Well, it’s a 45 round shoot which I was hoping to do with my .303, until I realised that morning that I only had 20 rounds in the safe. With an abundance of 7.62×39, it turned out that the trusty SKS would get a work out this morning.

Service rifle shoot

If you’re into your military surplus rifles, going along to a service rifle shoot should definitely be top of your list of things to do. With everything from WWI Lee Enfields, through to Mausers and AK47s and AR15s, every major armed conflict in recent history was represented.

The shoot was run in two details and as previously mentioned, was 45 rounds. This consisted of a Trinity and Action M match and a 10 round sniper shoot.

The Soviet weaponry and rusted casings are reminiscent of the Nicholas Cage movie Lord of War.
The Soviet weaponry and rusted casings are reminiscent of the Nicholas Cage movie Lord of War.

The trinity shoot is 5 rounds each in the standing, kneeling and prone positions. With no sighters or spotting scopes, you’ve got to know you’re rifle well. The SKS performed well, but was shooting low – which was more me than the rifle, as my wife was shooting too high with the same gun. One thing I may consider doing in the near future is replacing the front sight post with a skinnier one that doesn’t blot out the entire target. Those rifles that were scoped were limited to a magnification of 4x.

After those fifteen rounds, targets were checked, which is when a few of us actually got to see where our rounds were going. For myself, another shooter with an unsighted SKS and another with a new suppressor on his AR, the results were less than stellar.

The next ten rounds allowed us to compensate where we needed to, but the faster pace and movement involved in the Action M shoot means you can’t spend too much time trying to compensate, especially with open sights at 100 metres.

An Action M is usually shot in 60 seconds (at least it was when I last shot one at the Auckland Service Rifle Assn), and consists of 2 rounds prone, 2 rounds standing, one kneeling – reload another 5 round mag or clip – one kneeling, 2 standing and 2 prone. It’s 75 seconds for bolt actions, which is okay if you have a removable box magazine or stripper clips. However, when I shot this last with a Swedish Mauser and no stripper clips, it was certainly challenging. The rules for different types of matches are made by the NZ Service Rifle Association.

In light of the range of rifles and abilities present on the day, and the generally non-competitive nature of the shoot, no strict timing was done, although everyone went as quickly as they could.

SKS on bipod
The sniper shoot allowed for rests or bi-pods. Handy hint; your car’s floor carpeting can be used if you forget your shooting mat.

The last ten rounds was a sniper shoot which allowed shooting aids, such as rests, bi-pods and spotting scopes – this is where many people were able to turn the tables – despite the smaller targets. Having someone spotting for you is also very helpful when you’re on iron sights.

Although I didn’t place highly, I did enjoy the day and seeing all the old relics shooting (and their rifles too). About a third of the shooters were from HSSRC, so there were some friendly faces, and a few us enjoyed shooting some silhouettes with the rimfires on range 2 afterwards. All-in-all, for $20 and the cost of ammo, a good day was had all round.

Finishing the day off with some silhouettes at 25, 50, 75 and 100 metres was good fun.
Finishing the day off with some silhouettes at 25, 50, 75 and 100 metres was good fun.
NZDA Auckalnd Branch range target boards.

Where to shoot in NZ: Auckland Branch NZDA Range

Geoff 3 Comments

The New Zealand Deerstalkers Association is one of the organisations that helps shooters and hunters in this country by providing facilities, as well as speaking up for us collectively when there are political issues that may affect our sport. With branches all over New Zealand and a culture that is inviting, it’s always worth checking out your local branch to see if membership is for you. However, if you’re just after a casual shoot or you need to sight in your rifle or test your reloads, the Auckland branch has a fantastic range you can access most weekends.

Access to the Auckland NZDA Range

The Auckland Deerstalkers Range is located in a working forest, and is accessible only at certain times during the day. This makes it essential to check the range calendar to find out when general practices are on, and what time the gates will be open. If there’s an organised shoot on, you will be turned away – so save yourself the hassle by checking the NZDA website or getting in touch with them.

The NZDA Auckland Branch is an ideal place to test reloads.
The NZDA Auckland Branch is an ideal place to test reloads.

There is a morning session and an afternoon session. I would recommend aiming for the afternoon timeslot, as there are generally fewer people around, which means more shooting for you. It’s still a busy range though, and safety is the number one priority. There are a few range officers on at any given time, and they are give you very clear instructions.

Shooting at the Auckland NZDA range

Shooting at this range is a real pleasure and is ideal for sighting in or testing reloads. There are a row of benches to shoot from, with plenty of room to store your gear. There are also gun racks behind the shooting line if you have more than one rifle. If you want to shoot prone, sitting, kneeling or standing, you can shift your bench over a bit and go for it.

Because the range is located in a working forest, there is no smoking at all – so keep that in mind if you’re fiending for a smoke after a couple hours, because there are controlled entry and exit times and you’ll just have to hack it. This also means no tracer rounds, and obviously no incendiary rounds or anything crazy like that. The backstop for the targets is a pile of old tires – about 14 tonnes of rubber – so setting that alight would probably be a bit of a problem…

The shoot is quite organised, with a detailed safety briefing beforehand. There are 25, 50 and 100 metre ranges that run at the same time. The 50 and 100 metre targets are shot off the same mounds, while the 25 metre range is separate. There is also a 200 metre mound, but when this is in operation all of the other ranges have to be shut down as it is behind them.

Shooting is done in ten-minute sets. You set up your targets, get ready and when everyone has their ears on, the range is ‘live’. You then have ten minutes to do your damnedest, after which ceasefire will be called. At this point everyone makes their firearms safe and steps away from the benches. The ROs check the rifles and when everything is deemed clear, shooters can go forward to assess and patch their targets. There are targets available for 50 cents each if you don’t have your own, and there are generally staple guns floating around. Try and take your own stapler if you can. For anyone intending on spending a decent amount of time at the range, a staple gun is a good investment. I use duct tape when I don’t have one on hand, but it’s not nearly as quick.

The afternoon (or morning) continues in ten minute increments until time is up – which seems to be much sooner than you want, but hey – time flies when you’re having fun.

A chamber safety device (CSD) is compulsory on the range.
A chamber safety device (CSD) is compulsory on the range.

The cost and experience

The NZDA range is located about 25 mins outside of Auckland city, and it took me just over 40 mins from East Auckland. The cost is $20 per shooter – a very reasonable sum. Bear in mind, this is not an organised club shoot, but rather an open practice day. Don’t turn up without a rifle expecting to shoot. If you don’t have your own firearms and would like to give shooting a go, you can get in touch with the NZDA via their website and arrange attendance at a club shoot. Otherwise, there are plenty of clubs in Auckland where you can give shooting a go. If you’ve never fired a rifle before, try starting off with smallbore first to get your bearings.

The range officers at the NZDA are friendly and knowledgeable, and very safety conscious. All of this adds up to a good shooting experience in my books, and I would recommend this range to anyone looking for a good way to spend a Sunday afternoon. The shooting mounds are covered, so weather isn’t a huge factor. If it is pouring with rain, your targets will be worse for wear. The rest of the facility is outdoors though, so unless you are shooting or on the benches behind the shooters, you’ll probably have to sit in your car to stay out of the weather. While it doesn’t have all of the trappings of an indoor range (like plumbing or coffee facilities), it’s certainly a good way to enjoy shooting.

If you’d like to tell us about your experience at the NZDA Auckland Branch range, or would like to find out about other shooting facilities in Auckland, leave a comment below.

 

PPU 7.62X39

Product review: Prvi Partizan ammo

Geoff 4 Comments

Prvi Partizan ammo has been on the market for years – decades even – but has only just started to make an impact in New Zealand. Or so you thought. Abbreviated to PPU, Prvi Partizan as we know it today has been around since the 1940s, although the company traces its roots back to the late 1920s and has had a few different names as wars and politics have shaped Europe.

My Serbian friend tells me it’s pronounced “pr-ah-vi”, not “privvy” as most people sound it out. It translates roughly to “first partisan” and gets its name from the long and thing rifles produced for partisan forces by the factory in earlier years.

War – what is it good for?

Well, most of the sporting arms and ammunition we enjoy today share their history with their military counterparts. A tonne of the most popular hunting and sporting cartridges today are military cartridges from the past 100 years or more, including:

  • 7.62×51 NATO (.308)
  • 5.56×45 NATO (.223)
  • .300 AAC Blackout
  • 7.62×39
  • 7.62x54R
  • 6.5×55
  • 7.5×55
  • 7.92×57 Mauser
  • 30-06
  • .303
  • .338 LM
  • .50 BMG
The price of PPU makes it hard not to stock up.
The price of PPU makes it hard not to stock up.

Not to mention the endless array of pistol ammunition too. Of course the search for bigger, better and boom-ier things has led to a surge in development in the cartridge market today, much of which is driven by shooters who demand a high level of accuracy. Ammunition that used to only be available to wildcatters for varminting or bench rest shooting is now common place in the USA and is making its way over to New Zealand as well. Rimfire is also growing in leaps and bounds with the .17 WSM making waves in the shooting community.

But what about those stalwarts of scrub hunting and cheap and cheerful plinking? The cut down .303 bush guns and the semi-auto fun-makers in 7.62×39? Well, PPU is your knight in shining armour. For those that love shooting their military calibre rifles without breaking the bank, the ammunition produced by Prvi Partizan is worth your consideration.

On the plus side

While you might think Prvi hasn’t been in the New Zealand market for a while, it actually has. If you’ve shot Highland ammo, you’ve shot PPU. It’s the brand they’ve been using down here. In terms of military cartridges, Highland hasn’t been the cheapest, but it’s a step up from the dirty steel-cased stuff from Russia. It’s certainly better than putting corrosive ammo through your firearms, especially if you’re not that thorough with your cleaning.

Annealing marks on .303 and 7.62x39 PPU factory rounds.
Annealing marks on .303 and 7.62×39 PPU factory rounds.

Prvi Partizan ammunition is brass cased and generally considered to be good brass for reloading. Many Swedish Mauser fans rate the 6.5×55 PPU brass behind Norma and Lapua, but ahead of the American-made stuff. In terms of how soft or long-lasting it is, I can’t personally say. I’m on my second round of firing with this lot of brass and haven’t seen anything untoward yet, but we have a ways to go before anything should be cropping up. When I do get my brass into the higher firing counts I’ll post again to let you know, but considering I have over 140 cases for 6.5×55 alone, I doubt that will be any time too soon.

Considering how good the brass is, it’s certainly worth the price. This is especially the case with calibres like the .303 where you might only have a few options, all of which are more expensive. Not only do you get an acceptable level of accuracy out of it, but you have (I’m guessing) between 6 and 10 more reloads out of them – if not more.

What is the cost? I’ve seen the blue boxes cropping up in a few stores around the country and they’ve ranged in price from $31 to $36 for big rounds like the .303 and 6.5×55. The 7.62×39, which I’ve bought for a reloading experiment, runs at around $30, but if you go to the right Hunting & Fishing, you can pick it up for $25. Most stores will give you a bulk discount if you buy a few packets anyway.

How accurate is it? Well, how long is a piece of string? How accurate a particular round is will be determined by many contributing factors, not least of which are shooter skill and the particular firearm in question. The picture below shows PPU 139gr FMJ 6.5×55 three shot test groups, one is about 1.5 MOA and the other is 2.6 MOA. These are shot from my cut-down 20.5″ barrelled Husky M38. The other target, for comparison, is another reasonably priced brand, Sellier & Bellot 140gr SP, at 2.4 MOA.

PPU 139 gr FMJ and S&B 140 gr SP
PPU 139 gr FMJ and S&B 140 gr SP

 

This is not bad, considering many are happy to get 3 or 4 MOA groups with milsurp rifles and cheap ammo. However, you don’t get many people bragging about S&B brass for reloading. The picture below shows the S&B group with an unfired round for reference. Bearing in mind that the orange circle is about the size of a kill zone on a deer, this is very reasonable accuracy. If these groups were zeroed in, every shot would be a clean kill.

S&B 2.4 MOA group with unfired 6.5x55 round for comparison.
S&B 2.4 MOA group with unfired 6.5×55 round for comparison.

The negatives with PPU

Well, no one on the range is going to look at your ammo tin on the range and think your other car is a Porsche. But, if you don’t mind that, there’s not much to gripe about with Prvi Partizan. So far I have only shot .303, 7.62×39 and 6.5×55 in PPU and each has performed better than I would expect budget ammo to. I also find it to be quite clean, generally speaking.

However, if you’re wanting superb accuracy without hand loading your own ammo, this may not be the ammo for you. I would suggest trying it – your rifle may love it – but you may be better off paying one and a half or two times the price to get match-grade ammo.

0.64 MOA group shot off a bi-pod with PPU brass, Federal Match primers, 142 gr SMK HPBT projectiles and 34.7 grains of AR 2208.
0.64 MOA group shot off a bi-pod with PPU brass, Federal Match primers, 142 gr SMK HPBT projectiles and 34.7 grains of AR 2208.

There may also be variations in weight of brass and even wall thickness or hardness. This is pure, untested speculation. The only reason I say this could be possible is that the low price indicates that the machinery that produces this brass may not be as thoroughly regulated or maintained as those operated by Hornady or Lapua. The staff may not be as well compensated. But who knows?

What you may wish to do is individually weigh up the clean and empty brass out of a box or two, and see what the variation is between cases. Some spread is to be expected, but too much could have an effect on reloading. You could also see how much water each case holds to determine case-wall thickness and internal capacity. Anyway, I’ve been managing to get smaller than 1 MOA groups out of this brass, so I’m not complaining.

Overall, I think it is well worth the purchase. The accuracy is good enough for hunting ammo if you get the soft point variety, and there’s certainly a place for it in the safe if you just want plinking ammunition or a source of cheap brass.

100 yard shooting with Husqvarna M38

The benefits of shooting with your significant other

Geoff Leave a comment

There are a lot of guys who go out hunting or shooting to escape everyday life, and for some this means domestic bliss too. And fair enough. Everybody needs some downtime –  a hobby or pursuit where they can unwind. However, there are also distinct advantages to shooting with your significant other, whether you’re a man or woman. And I said shooting with. Not shooting.

Learn new skills

I go out shooting with my wife a fair bit. And since she has taken up shooting sports we have tried out several clubs and different guns, and we’ve both tried things we wouldn’t have otherwise. We’ve also both found different things that we are good at.

Where I like to technically analyse every part of my shoot, from my reloaded ammo to the wind dope and projectile weight, my wife is very good at reactionary shooting – such as trap shooting. Which, if I’m honest, I’m hopeless at. With a bit of practice, I’m sure I could get the hang of it, but it’s not for me.

Establish yourselves

Shooting is a great way to bond as a couple. I’m not about to give relationship advice on my firearms blog, but suffice it to say that picking up a hobby and spending time together certainly doesn’t hurt when it comes to getting to know each other a bit better.

My wife shooting her .22 at the NZDA Auckland 100 metre range.
My wife shooting her .22 at the NZDA Auckland 100 metre range.

Become competitive

Whether you like to compete against yourself, each other or other participants, shooting sports are competitive. And the great part is, you don’t need to be particularly athletic or gifted to be moderately competitive at a club level.

This is a great way to enjoy the thrill of and success of competition, and will enhance your enjoyment of your shooting. Get out and try local competitions and learn more about the kind of shooting you like. You’ll also meet some great people who have plenty of advice to give.

Spend more money

Having a buddy on the spotting scope or putting up targets is another advantage.
Having a buddy on the spotting scope or putting up targets is another advantage.

Let’s be honest, every time you try and justify the cost of some new rifle part or reloading accessory – the last one you’ll ever need, promise! – it doesn’t go down too well. I know people you hide their hobby expenditure from their partner, using cash jobs to pay for ammo and new toys.

If your husband or wife is just as into their shooting as you are, it’s easier for them to understand why that new shooting rest or a higher magnification scope is actually necessary.

Share the load

If you’re out hunting or setting up targets on the range, it’s great to have a buddy around to help lug things about or give their opinion when necessary. If you’re shooting partner is your spouse, well, you’ve pretty much always got someone you can count on to help you on the spotting scope or skinning a deer.

It’s not for everybody, but for some, taking your spouse to the range or teaching them how to reload could be a great way to enhance your enjoyment of the sport you love.