Skip to main content

Category: Ammunition

Choosing a calibre for a secondary AR-15 upper?

Best upper for AR-15

Geoff 2 Comments

So you’ve bought your first AR-15 and you’re super excited by the fact that you can swap in just about any upper you want to create a whole new weapon. But which is the best upper to choose? While the .223 is a great round, it’s not the be-all and end-all of rifle shooting (nothing is), so what about about a different calibre?

Here’s my take on what you can achieve my swapping out the upper on your AR-style rifle.

How about a .22LR Upper?

Well, not the worst idea actually. If you want a cheap way to practice with your AR or to introduce younger shooters to the sport, using 22LR ammo is a great and inexpensive way to do it. However, there are some conversions that use your 5.56 barrel – don’t do it. It can work, but it won’t be a satisfactory way to shoot either caliber, and it requires more work.

Rather, spend the money on a full upper and magazine, like this one from gunsupplies.co.nz, which will work with any milspec receiver. Although, to be honest, for not much more you could buy an entire .22LR AR-type rifle.

7.62×39 anyone?

Okay, let’s be honest, I’m a big fan of the humble 7.62×39 Soviet cartridge. It’s cheap and dirty and does the job. But, would I put it through an AR upper? Not really to be honest. While the AR platform is great. there’s not much reason to get it to shoot cheap Russian ammo.

If you want a cheap way to shoot this calibre, you can get a Chinese SKS for a third of the price of a 7.62×39 upper, and again, you have a whole new rifle to enjoy. You also won’t feel nearly as bad using it as a knock-around bush gun.

AR-15 in .300 BLK

If you want 7.62×39 ballistics in an AR-15, .300 BLK might be the way to go. Developed for spec-op military applications, this round is AR-friendly. It feeds from a standard STANAG magazine with no modifications, and without reducing the capacity, so at least you can use your current AR mags.

If you’re looking for something novel and interesting to shoot, which is designed for the platform and actually useful, the .300 AAC Blackout could be the answer. It is more expensive to shoot than any of the other rounds, and would probably necessitate reloading to make it a viable addition to your safe.

Which AR-15 upper should I choose?

Well, my personal preference would be to have one completely milspec rifle for service rifle competitions, a 20 inch barreled set up for 3-Gun, and perhaps a .300 BLK upper to enjoy shooting something a bit different.

But hey, that’s just me! What would you choose as your ideal black gun set up?

Brand new 7.62x39 PPU ammunition

Reloading for SKS or AK – is it worth it?

Geoff Leave a comment

The SKS is one of very few semi-automatic centrefire rifles that allow for cheap and cheerful shooting in New Zealand. The rifles themselves are amongst the cheapest autoloaders around and the steel-cased ammo is a bargain compared to other centrefire rounds, as detailed in a previous post on the venerable 7.62×39.

However, what about reloading for the SKS or an AK? is it worth it? Every armchair shooter in the world will want to quickly chime in on why it’s simply not worthwhile reloading ammo for these rugged rifles. Here’s my take on it.

You will lose some brass

There is no question about it. With almost any semi-auto rifle, you should be prepared to lose a few casings. Even bolt action rifles in military service rifle matches will sacrifice some brass here or there for the sake of speed. But the SKS really loves throwing brass away. The video below perfectly illustrates what I mean.

However, even with the brass being flung in every possible direction known to man, you will still get a healthy return if you have patience (and the grass isn’t too long). The majority of your shells will land between 1 and 3 O’Clock, within a few metres of your shooting position – but not all of them. On my last trip to the range I shot some brass-cased PPU with some friends, and we recovered 55 out of 60 ejected cases. That’s over 90 per cent of your brass coming back to you – not bad.

The other option is to have a brass deflector or catcher attached, but these render your rear sights useless. Therefore, this only really becomes possible with a scoped SKS, which, as we all know, is not the most worthwhile pursuit in the world.

You will damage some brass

Again, this is a given. Autoloaders are hard on brass and the SKS is no exception. There are extractor marks from rough ejection, and if you’re shooting over a concrete floor, under a roof or near any kind of structure, chances are your brass will hit it and could possibly get dented.

At the end of the day, a small level of attrition is to be expected – it’s the cost of doing business with the SKS or an AK.

It is not a super-accurate rifle

Look, handloading is not going to turn your 1 – 3 MOA SKS into a 1/2 MOA super rifle. It just won’t. Usually handloads can be made to be incredibly accurate, and this works because you develop ammunition that is suited to your rifle’s chamber. The SKS is an intermediate-cartridge fed battle-rifle with very loose tolerances, which aid its reliability. Remember, cheap, reliable, accurate – you only get to choose two.

If you’re reloading the 7.62×39 for a CZ bolt action or a  modern semi-auto, then you’re talking about a whole different ball game.

The economy isn’t quite there

The price of 7.62×39 ammo means it’s not really worthwhile buying brass-cased stuff, plus your other components and dies. It will end up costing about the same in the long run, and your accuracy won’t be much better.

Generally speaking you can pick up steel-cased ammo at one of the major gun stores for around $16 or $17 per 20 rounds. If you buy in bulk, you can save a lot more too. Realistically, if you’re cost conscious and like doing a lot of shooting, buying in bulk would be a better solution than reloading. Plus, who doesn’t like opening the safe and seeing a wall of ammunition?

M43 ammo on stripper clips
What to feed a hungry SKS?

But I’d still do it

However, I’d still do it. And the reason is, because I enjoy shooting and I enjoy reloading. Brass cased ammo costs $8 more per packet (if you know where to shop – $15 if you don’t). When thinking about the cost of the brass, I account for the fact that I get the value of one factory pack of ammunition regardless. In other words, the brass is costing me $8 per 20, even though the pack of ammo costs $25, because I shot $17 worth of factory stuff. I say $17 worth of shooting, because that’s what a box of Tula SPs would set you back.

So, I can expect to retain about 18 cases, and I might get 5 or so reloads out of them. Throw in the cost of primers and powder (which I use for other loads anyway), and projectiles. Now, this lot I’m going to reload with Hornady’s Z-Max. In 7.62×39 the Z-Max is a SST projectile, with a different coloured tip according to Nathan Foster – whose research I would definitely rely on.

Why the Z-Max? Firstly, let’s be honest, a green-tipped bullet kind of looks cool. But also, as Nathan’s research suggests, the SST or Z-Max round is probably one of the better choices of bullet for what the SKS is designed to do – wound effectively within a limited range. I could save a few cents per round by going for a soft point projectile from another manufacturer, but I’m keen to give the Hornady bullets a whirl.

As for the cost of the dies – well, hopefully that gets absorbed over time. If not – I’ll just have to shoot some more until they’ve paid for themselves.

Assorted brass picked up from different ranges.

Range brass – any good for reloading?

Geoff Leave a comment

Picking up brass from the range is seen by some to be scavenging, and by others to be a useful service to all range users. But at the end of the day, should you be putting range brass through your rifles?

When you sling a couple hundred rounds down range, chances are you won’t be able to recover all of your brass, especially if you’re shooting a semi-auto rifle. After a shoot we all (hopefully) like to clean up our casings, even if they’re not reloadable. We also pick up our targets and other rubbish because we like to keep the range in good condition for all users – and we like to find it that way too.

However, while you’re cleaning up and finding (most) of your brass, you come along some shell casings left by other range users. Do you take them? Sure, why not? Picking these up leaves the range cleaner than you found it and probably makes up for some of the brass that you’ve lost. You could recycle it, beef up your collection of weird and wonderful casings, or you could even reload it. But should you?

Reloading casings of unknown origin

When you’re reloading to achieve optimum accuracy, the answer is: No. As mentioned in a previous article, hand loads designed for match performance eliminate as many variables as possible. When you pick up random brass you have no idea how many times it’s been fired, whether it was a factory round or reloaded and what kind of pressures it’s been subjected to.

All of this has a large bearing on tempering and forming of the metal, which ultimately won’t be consistent with any of your own carefully prepared cases. If you’re controlling your shooting and keep brass sorted as unfired, once-fired, twice-fired and so on, why would you introduce a complete unknown into the mix?

Although, we all like to let loose and destroy things from time to time. Not every trip to the range is about absolute accuracy. Sometimes you just want to put big holes in things. Other times you could be introducing your friends to shooting. These are occasions that don’t warrant using your pet loads and favourite materials. In my opinion, range brass is perfect for this.

Preparing range brass

When it comes to using unknown brass you’ve got to be more careful than usual – but saving your good brass makes this extra effort worthwhile. I don’t think tumbling is a necessary step in reloading, but when it comes to cases picked up off the range, I think it’s a great idea.

Running your new found cases through a tumbler will remove any unknown dirt or residue that may be lurking around. You should also make sure you clean the primer pocket, trim the case to length and debur/chamfer the inside and outside of the case mouth if necessary.

Remember that these cases may have been fired 6 or 7 times before you ever got your grubby mitts on them, so they could only have one or two shots left in them. But again, remember that you’re saving your good stuff for competition days and hunting trips – when accuracy is really important.

In the meantime, keep your range tidy and your ammo box stocked by cleaning up after yourself and your fellow range users. Just don’t take someone’s brass if they haven’t left yet – chances are they want that when they’re done!

Match quality rounds reloaded for half the price of factory ammo.

How to save money on reloading

Geoff 3 Comments

Reloading not only allows us to create accurate rounds tailored to specific rifles, but also helps to keep down the cost of shooting. Components can be costly in New Zealand, especially powder which accrues charges for dangerous-goods handling.

The cost of reloading of in New Zealand can be high compared to buying components in the States, and unfortunately a lot of this does come down to those handling charges. Whether it’s the shipping, handling and import charges on bullets and brass or the explosives handling fees on powders and primers, there’s always something that makes it more costly to assemble your own ammunition at this end of the world.

Fortunately there are a couple ways to reduce the cost of hand loading your own ammo. Here are two that I recommend.

1. Shopping around

There are numerous gun stores in Auckland and the rest of New Zealand that sell reloading components. There may only be a few major ones, but there are also plenty of local shops that stock what you need.

In order to find the most cost-effective way to produce match-accuracy rounds I put together a spread sheet comparing the cost of the primers, brass, powder and projectiles at around eight different stores. By comparing prices around the country I managed to shave off more than 50 cents a round. That’s $50 per hundred rounds. Not bad.

When shopping around, don’t forget to account for courier fees. For example, when purchasing some Sierra projectiles I found that the cheapest store in the country was around $10 cheaper than my nearest gun store. Given the $4.50 courier charge and the time it would have taken to reach me, I opted to go the slightly more expensive route.

2. Economise where possible…

…without sacrificing quality. In some areas you may wish to spend a tiny bit more. For example, Federal Large Rifle Match primers cost me less than a dollar more per 100 than less consistent primers. That’s an area where I don’t mind spending a tiny bit more.

When it comes to economising, not everyone can afford to buy vast quantities of powder at a time. However, you can increase your powder economy by 10 per cent very easily.

ADI Powders are manufactured in Australia, and as a lot of shooters know, many Hodgon powders are produced at the ADI plant. In fact, ADI provides a handy sheet that lets you find the Hodgon equivalents of their powders. There is also info for other manufacturers as well.

The reason this is such a bonus for New Zealand reloaders is that not only can you support a company that is kind of local (across the ditch is better than across the world), but if you buy their 500 gram containers, you’ll be getting 10 per cent more than an American manufactured equivalent 1lb which is 454 grams. Usually at the same price too.

There are always ways to make your reloading cheaper, hope these two help!

 

Various live rounds.

Bringing ammunition into NZ

Geoff 38 Comments

Over the Christmas break I was fortunate enough to be able to go to the USA with my wife to visit family and friends. Of course the States is a Mecca for gun owners, and I did a fair bit of shooting while I was there. I also managed to bring back some ammunition and other shooting equipment from my trip. I thought I’d provide the details of bringing ammo back from the USA to NZ, as information was sparse when I was looking into the process.

Inform your carrier

I’m putting this here because it’s the first thing you should do. Give your travel agent or the airline plenty of notice (aim for 2 weeks minimum) that you will be carrying ammunition and/or firearms in your checked luggage on the way back. You don’t want them to reject your luggage when you’re coming back home, leading to a massive waste of money.

The only real restriction in how much ammo you can bring back is what the airline says. For me, flying Air NZ, it was 5 kg per person. Between my wife and I, we brought back just shy of 10 kg of live rounds. They stipulate “sporting rounds”. I guess that means don’t bring mortar shells in or something, as every military calibre I’m aware of has sporting applications.

They also stipulated it should be in its original packaging. No problem there.

Funnily enough, after declaring to the carrier that I would be bringing ammo (and possibly a firearm) back into NZ, I underwent a “random” search when leaving Auckland for San Francisco. Just a quick swap to see if I was covered in explosives or anything – no big deal. I’m assured it was random. I think not – but who cares?

Purchasing your ammo

When you’re buying ammunition online, a lot of companies won’t sell to you if you have a USEever A delivery address and a NZ billing address. You may need to get family over there to purchase for you ahead of time (so it’s delivered by the time you get there), or you’ll have to go into a gun store.

As an aside, not being a US resident makes it very hard to obtain a firearm. There are also wait periods in a lot of states from the time of purchase to the time you can take possession of the weapon. If you’re wanting to get a rifle over there, a lot of planning is needed. You also need to make sure it’s on the approved list provided by the NZ Police, and there is an import permit involved as well. However, back to the ammo…

Leaving the country with ammunition

My experience was flying out of California (San Francisco) in the States, depending where you go, there could be a vast difference. I had no problem leaving the country with ammo. Nothing to report, my carrier already knew and no hold ups here.

Arriving in New Zealand

There is no import permit required for sporting ammunition. Some people will tell you differently, but there really isn’t. I spoke to arms officers, the police, airport police, Air NZ and airport staff before even leaving for the USA. Not everyone says the same thing, but according to the arms officer, police and my experience, no import permit is needed for live rounds. Heck, customs didn’t even check my firearms licence.

When going through customs I technically had nothing to declare. I didn’t think the ammo needed declaring, and I had nothing else that would get in the way of a completely legal reentry. However, I declared the ammunition anyway.

I did this just to avoid any hassle. i didn’t want to be pulled up or anything, so I volunteered the information. The customs officer searching our bags said they had no problem with ammunition, and they don’t even care how much (again, just the airline limit), but it’s firearms parts they’re concerned with.

I also brought in a scope (my wife’s Christmas present from me) and some reloading gear (my Christmas present from my wife’s grandmother) with no issues at all. Customs did mention the reloading gear, but I guess their concern was whether or not it was used or had any foreign matter in it.

They had more of an issue with the hair product in my wife’s bag than any of the firearms paraphernalia that we brought in.

I hope this clears it all up – it’s actually very easy! Any questions? Post a comment below.

PPU brass and Federal Large Rifle Match primers.

Accuracy in reloading

Geoff 3 Comments

Just how important is accuracy in reloading? Well, it depends how accurate you want your rounds to be. The key to achieving consistently good rounds is removing every source of variance possible – you are going for repeatability. In other words, to get your bullets in the same hole every time, you need to make sure that all  the variables that go into making them are as controlled as possible.

Match vs. Plinking ammo

If you’re reloading ammo to burn at the range, you can afford to take a “set and forget” approach to your reloading. Once you have your powder trickler set to the right volume, you should be getting fairly consistent charges. You’ll also only need to measure your COAL a few times to ensure that the rest will be coming out the same. This is good enough for general ammo production, and will be as good or better than factory ammo at a third of the cost (depending on your components, etc.).

However, for match ammunition or for working up a load for a new rifle, a lot more precision is required. I tend to weigh every charge on a scale before seating the projectile. Every round is exact. If it’s not, I pour another charge and start again. Because the powder trickler goes off volume and the scale goes off weight, some standard deviation is to be expected.

Resized case in shellholder.
Match performance is the result of repeatable procedures.

I also measure the COAL of every single round. Not because my settings have changed, but because slight variations in even the most expensive bullets do happen. Those that aren’t exactly the same get pulled or used for target practice. Why be so pedantic? Because we’re eliminating every possible variation to make sure our ammo production is as uniform as possible from round to round.

I know of people that do this to the extreme. The weigh every bullet they use. They have a log for every casing, rejecting ones that produce inferior accuracy due to differences in metal hardening or other aspects that are beyond the average reloader’s comprehension. This is for the accuracy fanatics. And more power to them, but I enjoy a fine level of accuracy for the amount of effort I put in. It’s each to his/her own. If I had to be as pedantic about my reloading, I probably wouldn’t enjoy the actual shooting as much. But everyone is different, and for some of the shooting fraternity, ultimate accuracy is the ultimate goal.

A proper work space

Whether you’re reloading for 3-gun, varminting or 1000 yard shots, one thing’s always necessary; a properly prepared working area. A space that is free from clutter, mess and distraction is essential.

Before I learnt this lesson, I’ll admit I knocked over a few cases full of powder and so on. Everything should have its place in a reloading station. A good example of how much your work area affects your ammunition production is a mistake I made a few days ago…

Working up a load I was preparing six rounds at 1-grain intervals to take to the range. With six different charges, that’s a total of only 36 rounds, but there’s a lot of finicky business around getting the charge weights right every time. About half way through I move my scale from one bench to another to make room for something. Once settled on the other bench, the charge come up at a different weight.

Now this wouldn’t be a problem if I was using a digital scale, I would be able to hit TARE and know I was working with a clean slate. However, with my mechanical scale, things aren’t quite so simple. The difference in weight readings was because my bench was on a lean… Something had got under one of the legs and was causing the weight on one side of the scale to dip down. The difference was about 1.2 grains. Yup, I just painstakingly produced about 18 rounds that were completely useless because I had no idea what the actual charge was.

Not the worst set back in the world, but a good lesson to learn – always prepare your space thoroughly before starting your reloading procedures.