Geoff – Page 10 – The Gun Rack

If I had a range like this in my back yard, I may divide my time slightly differently.

Swiss 300 metre shoot – Any Sights Any Rifle

December 26, 2015December 26, 2015 Geoff 2 Comments

There are a few centrefire rifle events every year that are just thoroughly enjoyable and worth attending. The Auckland NZDA Prize Shoot is one, as is the Thames NZDA shoot. The Hangiwera Station Sniper Shoot is definitely up there, and so is the Swiss Club’s Any Sights Any Rifle 300 metre shoot.

This year was my first shoot at the Swiss Club, although some of my shooting buddies have been going for years, and I attended on their recommendation.

An enjoyable shoot

The shoot is well organised, and is accommodating for younger or inexperienced shooters. There are club rifles available and the RO is very helpful with sighting in. The club rifles are either straight-pull Karabiners (K31s), chambered in the venerable 7.5×55, or modern semi-autos in 5.56 NATO/.223 Remington.

If you’re bringing your own rifle (as most do), you can use anything you like. If you’re really ambitious, you can try your open-sighted SKS and see what it will do at 300, but you’ll be going up against Bench Rest rifles that hit 10.1 more often than not. Most rifles on the day were a mix of F-Class, BR, sporting and service rifles. Because there is such a variety of shooters and equipment, it’s more likely that you will be competing amongst your group of friends than with the top of the table – unless you’re an excellent BR shooter.

The variety of rifles on the range is a joy in itself.

Although I knew there was no way I could beat the top BR shooters with my modest sporter, this did not diminish my enjoyment of the day at all. I’m pretty competitive by nature, but found myself comparing my scores to my wife’s and those of the other Howick shooters. It also meant I got to see a bunch of really cool guns that you wouldn’t usually see in one competition.

Three-hundred metres is a pretty challenging distance if you haven’t shot past a hundred before. There were even a few who had not shot at all before. However, with the help of the club’s rifle master, these young shooters were hitting paper in no time.

The cost of the shoot is not prohibitive, with a range of $20 on the day, and of the cost of 25 rounds of ammo. The Swiss Club has a really good website for the ASAR shoot, which lets you book your position on the mound ahead of time. With several details across a few days of shooting, you’ll definitely find a time to shoot, and you may even try and better your score on another day.

The format

The shoot starts with 5 individual sighters. Each shooter on the line takes a single shot from the prone position (all shooting is prone), after which the targets go down and the scorers call back the score and location of the round to the RO via radio. A notepad and pen are handy, as you try and figure out where your sighters are landing. The shots are called out like “9 at 3 o’clock” or “7 at at 1 o’clock”, with the first number being the score (1-10) and the position on the clock helping you to identify which segment of the target you are landing on.

After you’ve gone through your 5 sighters, there are 10 individual scoring shots, shot in a very similar fashion. Each shot is still called out, helping you adjust your shot placement, especially if the wind picks up downrange.

A notepad is essential to sighting in at 300 metres.

After the individual shots, you have “rapid” groups of 2, 3 and 5. I say rapid, but it’s really not. It’s simply a few shots in a row. There is no pressure to hurry up, and there are plenty of people single loading their shots.

All shots are still called out, except for the final group. This means you can adjust your shot placement right up the last minute.

How hard is it to hit the 10 ring? You’ll need to be shooting around MOA (just over) to consistently hit the 10 ring at 300 metres. If you want to notch up a bunch of 10.1’s, you’ll need to be shooting around between 0.5 and 0.66 MOA.

The experience

I thoroughly enjoyed the shoot. I went a bit early to watch some of my mates shoot, but also to familiarise myself with the format and calls. I did end up waiting around a bit, but I ended up being there for most of the day, as I had some “technical difficulties”.

After watching the 11 am detail, I hung around over lunch time before taking up my spot on the mound. I was a bit nervous as I was shooting my rifle in its complete configuration for the first time. Since the last time I had shot, I had fitted and bedded my Boyds Prairie Hunter stock, had a new bolt handle machined, and modified my magazine follower. Also unfamiliar to me was a 6-24 scope that I had been sent to review.

One new bolt handle coming up, thanks to my mate Thomas.

Unfortunately the scope did not perform and was unable to be zeroed on the day. This meant I had to wait through an entire detail, pushing out my wife’s shoot as well. However, I used this time to fit my trusty Vortex Diamondback 4-12×40 BDC, which I brought just in case. I have learnt my lesson with taking unfamiliar equipment to a shoot.

Unfortunately this meant I had to sight in from scratch, however, I was on paper on my 3rd shot, and the rest was just fine-tuning. By the end of my shoot I had it right were I wanted it, which meant my wife had the rifle ready to go for her shoot, and actually did quite well. Results can be seen here.

Overall I was very happy with the my complete sporter set up, and with some more powerful glass, I think I’d be comfortable taking this rig out onto the F-Class range.

Looking forward to some Norma brass at the end of this.

I think the load development still has some way to go, particularly as the barrel on this rifle is quite short. Not having developed a satisfactory handload, I shot this competition with factory 6.5×55 ammo. I used the Norma-Sierra 144gr HPBT, and the round seemed to perform pretty well. To be honest, I was more interested in the brass than anything else, as I think this rifle will prefer lighter projectiles, in the 130 – 140 grain range. Over the holidays I’ll be testing out the 129 gr Hornady Interlock and 140 gr A-max. I’ll be comparing this projectiles side-by-side with the 142 gr SMK and the 144 gr OEM projectile in the Norma-Sierra load.

At the end of the day, the shoot was enjoyable, and definitely an experience worth repeating. You can shoot multiple times on one day, or on multiple days across the competition. If I have the time next year, I’ll probably try shoot it on a few days. Being located only 45 mins or so north of Auckland, the range is really accessible, although it is also rarely accessible. The Swiss Club is, of course, a club for Swiss nationals, and as far as I know, this shoot is the only time of the year that the range is opened up to the general public.

If you would like to try a different range and format, and perhaps a longer distance than you usually get to, you’ll definitely enjoy the Swiss Club’s ASAR shoot.

5 steps for replacing a shotgun stock

December 24, 2015December 24, 2015 Geoff 5 Comments

If you’re more familiar with the build of a bolt action rifle, removing a shotgun stock can be puzzling at first. No obvious action screws and a bunch of stuff hidden inside. Here’s a quick run down on replacing a shotgun stock.

Step one: Remove the recoil pad

The reason you can’t see any action screws holding the wood to the metal is that you have one long bolt hidden in the buttstock that keeps it all together. Removing the recoil pad will reveal a hole in the centre of the stock, through which you can access that bolt.

A Phillips head screwdriver is usually the tool for the job.

If the screws holding your recoil pad to the stock are hidden in the rubber and you can’t see what tool to use, try a Phillips head screw driver. Most manufacturers still use these.

What's missing from this SKB? You'll never know if you weren't paying attention in the first place. — What’s missing from this SKB? You’ll never know if you weren’t paying attention in the first place.

Step two: Remove the stock bolt

These are usually pretty easy to remove, and all you need is a socket wrench with appropriate extensions and the correct size socket. Trial and error will help you find the right socket size, as each firearm is different.

Because these bolts are not overly tight, the slight differences between imperial and metric should not be too much trouble.

CAUTION: If you’re working on a semi-automatic shotgun, there are a lot of parts (including springs) that will shoot out if you do not hold the stock and action together and carefully remove the bolt and other pieces. Watch how they come out, as you’ll have to put it back together.

Step three: Do whatever it is you were going to do

This is the part where you clean your action, replace your stock, repair any cracks, or whatever it is that motivated you to remove the stock in the first place.

Step four. Reassemble

Putting it all back together is pretty simple, especially for U/O, SxS and pump-action shotguns. If you’re working on a semi for the first time, I hope you paid attention when you took all the bits and pieces out, or you may end up with a click but no bang the next time you go out shooting.

There may be some fining up to do at this point. If you’ve replaced your buttstock, you may have to grind the old recoil pad down to size, or you might want to use some sawdust, stain and oil to fill up fine gaps between the action and the replacement stock (if necessary).

This Hatsan Optima O/U got a good clean while the stock was off for replacement.

Step five: Function test

With an empty chamber or dummy rounds (snap caps), test the firearm for function. This means loading, firing and unloading. This is the time you want to find out about it. Not in the blind or on the range.

Product review: Boyds Prairie Hunter gun stock for Swedish Mauser

December 2, 2015December 20, 2016 Geoff 17 Comments

Sometimes you find a winning combination. Something that just works for you. This has been my experience with the Prairie Hunter rifle stock from Boyds, combined with my 1943 Husqvarna Mauser – a dream come true. What makes this such an epic combination? There are several factors that combine to make this gun incredibly shootable, but for now, let’s look at the fancy piece of wood it’s sitting in.

The looks

The old Mauser looks perfectly at home on the range in its Prairie Hunter stock.

The Prairie Hunter is a good looking stock, no doubt about it. The first time this rifle was on the range in its new configuration, an old time shooter said “such a pretty stock for such an old rifle!” And he wasn’t the only one. Laminates are known for being hardy, heavy and beautiful in an age of synthetic rifle stocks.

In the looks department, this stock was certainly helped along. Boyds provided this specimen with a nice, thick Limbsaver recoil pad and synthetic caps for the nose and grip. What adds to both the functionality and visual appeal of the rifle, is an adjustable cheek piece. The adjustments are made from the top, with an allen wrench, which means no adjustment knobs on the side of the rifle.

Full profile picture of the Boyds Prairie Hunter stock with adjustable cheek rest. This picture is here especially for Zach.

Final fitting needed

Boyds does advise that their stocks are made to their house actions (imagine how many actions they have!), so final fitting may be needed for your rifle. For this particular project, I received my stock in ‘unfinished’ condition. This means a final sanding and some polyurethane are needed. The reason for this, is that old Mausers come with several different bolt configurations, depending on the life they’ve had. This means that the channel that the bolt handle fits into should be determined by the end user, depending on their particular model. With a bit of work to do, Boyds doesn’t send you a finished stock, that you will then have to cut into and sand down anyway. Makes sense.

Some relieving of matriral was needed at the front of the mag well. — Some relieving of material was needed at the front of the mag well.

The bolt handle notching was easily done, and is covered in my series of articles on bedding and finishing stocks. With this particular stock, I found that the floor metal was a couple millimetres further back than I needed it to be. All I needed to do was to relieve some material from the front end of the mag well to get the metal sitting where it should, and mating up to the action.

I chose to bed my action, which was a bit more work still, and instead of polyurethane, I opted for a hand-rubbed finish, using Birchwood Casey Tru-Oil and Stock Sheen and Conditioner. The oil even gave a nice gloss to the plastic bits on the stock as well. Learn my lesson without doing the hard yards though, tape off the recoil pad if it’s rubbery. The oil will make this super sticky, and you will get all sorts of fluff on your butt pad for a while. You will eventually be able to rub it all off.

The Tru-Oil immediately brings out the character in the laminate.

Performance

Oh what a joy. I couldn’t be happier.

And that’s not sarcasm!

The 6.5×55 is not known to have heavy recoil, but if you have a shortened barrel and sporterised stock, you feel every bit of it. Having purchased this rifle second-hand with the intention of restoring it, I was happy enough with the home-made sporter stock, but it was certainly made for a shorter person, and the lightweight nature of it didn’t do much to tame the kick of the old service round.

The extra weight associated with the laminate stock meant all sorts of recoil-reduction. I would definitely recommend going for this or a walnut stock over most of the synthetic options out there. The normal-person-sized length of pull also helped, along with the 1″ recoil pad. Don’t get me wrong, the stock isn’t overly heavy either. With a hollowed out barrel channel for free-floating and weight reduction, the balance and weight is nice. Most of the heft is around and behind the action – where you need it most.

Tall scope mounts are no problem with the adjustable cheek rest.

Combining this with my MAE 6-30 ST suppressor, recoil concerns are now a thing of the past. So much so, that I can shoot off the bipod with my off-hand under the grip as a stabiliser, instead of holding down the fore end to stop myself getting a scope in the face, as I had to do with the synthetic-stocked Mossberg ATR a month or so ago.

Shooting with this configuration and my wife’s Vortex 4-12X Diamondback with BDC reticle, my wife and I were hitting 9’s and 10’s at the 300 metre Swiss Club shoot a couple weeks ago – even a 10.1! And this is with factory loads (Norma-Sierra 144gr).

Adjustable cheek rest

One of the major selling points of the configuration I now have is the adjustable cheek piece on the Boyds stock, and I would highly recommend this option on the next stock you buy. Below are a few of the reasons I love this feature:

easily adjust for different users and eye-relief
raise your line-of-sight for scopes that are mounted high due to large optic bells, iron sights or bolt handle clearance
quickly lower the cheek piece when needed for cleaning rod access
ensure proper cheek-weld to maintain repeatable, accurate shot placement

Overall impressions

There is a lot to be said for keeping old military rifles in their original condition. However, if you’ve bought yourself a bit of a project, or inherited a less-than-perfect specimen, a great place to start with your customisation efforts is a replacement stock from Boyds.

You can get a stock that is more suited to varminting, target-shooting or tactical-style precision matches than the military wood. These old stocks were made to be shot with full winter clothing, and to be light as well. As such, they transfer a lot of recoil to a normal-size shooter. You can also help your sweet Swede look as good as it shoots. With a nice-looking stock, like the one I have in a Nutmeg finish, you won’t feel out of place next to the Howas and Tikkas on the range.

The Boyds stock completes the set up, along with an MAE suppressor and BOLD Trigger unit.

Bear in mind, when you order a stock from Boyds and you are not in the States, you have to keep your order under $100 to avoid costly permits which make the process impossible. If you or someone you know is making a trip to the USA, take advantage. Or get friends and family over there to help you out. Worst case scenario, you can still get an amazing stock, but you may have to forego some of the bells and whistles.

Mossberg 100 ATR 7mm-08 Review

November 7, 2015November 7, 2015 Geoff 2 Comments

The Mossberg 100 ATR gets its initials from the phrase ‘All Terrain Rifle’. To be honest, if that’s what you’re after, this fits the bill. An inexpensive rifle that is rough and ready, but with a couple features that do stand out, the ATR is not a glamorous 1000-yard shooter, but a simple hunting tool.

Affordability is…

I do a fair bit of reading and research when it comes to shooting, and I remember one thought that really stood out when reading on barrel metallurgy. While steel prices have increased noticeably over the last decade, rifle prices have remained relatively static. So, if the cost of raw material is increasing, how are prices not rising accordingly?

This can be partly answered with advances in manufacturing techniques and the use of polymers and synthetics in place of wood and other expensive materials. However, it can’t be ignored that even some of the most expensive rifles show a bit more roughness around the edges compared to their 80’s or 90’s ancestors.

Opening up the Mossberg box for the first time was a mixture of anticipation and nerves - how good would this rifle be? — Opening up the Mossberg box for the first time was a mixture of anticipation and nerves – how good would this rifle be?

Mass production has resulted in cheaper rifles, while some advances in tooling, assembly and technique have resulted in relatively consistent levels of accuracy.

The Mossberg ATR is the ultimate expression of these cost-saving measures. It has the features you want, and some extras that you’ll enjoy – but it does feel cheap.

On the plus side

Undeniably, the most positive thing about this rifle is its price point. It’s affordable enough for the beginner hunter to make their way into the sport, and even cheap enough for the seasoned shooter to justify buying one just to try a different calibre out.

The ATR has been around for a fair few years, and has been supplanted in the States by the Patriot series of rifles – which seems to be a step up from the old ATR. However, with quite a bit of stock floating around New Zealand, there are still plenty of brand new rifles and packages floating around. You can expect to get a rifle for around $600 – $700, and packages including mounting system, rings, a scope and possibly a couple extras for between $700 and $900. A few good examples are here, here and here.

Features abound

The half cock and side safety are features which will excite some.

Working in its favour, the Mossberg has a few features that you would expect to see on a more expensive firearm. Some that immediately spring to mind are the easily adjustable trigger, half cock on the bolt, side safety, a slick feeding action and fluting on the barrel.

LBA – Lightning Bolt Action – trigger system. The trigger on the ATR is fully adjustable, down to a mere 2 pounds. I found the 3 pound trigger pull from the factory to be light enough, especially for a hunting rifle, and even let one round off a bit too soon, as I expected more resistance from such a stock-standard rifle. Similar in appearance to the Savage Accutrigger, the LBA has a a thin piece of steel that nestles into the centre of the trigger. It’s pretty light and wiggly, but behind that is a rock solid single-stage trigger. The effect is similar to a two-stage trigger as the blade locks up the sear until fully depressed.
The half cock feature is something that a lot of hunters like. it allows you to be chambered and ready to go, with a simple push down on the bolt when you sight your prey. I personally prefer a bolt closed on an empty chamber, but the half cock is undeniably popular. The side-safety is easily reachable and operable, without shifting from your shooting position. You can easily manipulate it with the thumb of your shooting hand, but again, this isn’t something that is make-or-break for me.
The action is smooth as butter. In fact, probably one of the smoothest bolt actions in my safe. With two locking lugs and only a negligible bit of wobble when it travels, the bolt is well balanced. It’s a push-feed (as are most modern rifles), and picks up its rounds easily enough. I would buy this rifle all over again simply because it is so easy to work and feed.
The fluting on the barrel is a nice touch, and makes the rifle appear a bit more classy than its price tag would indicate. Aside from that, I can’t see much use for it. The weight saving couldn’t be too much, given it’s only have the barrel. And to be honest, this rifle could use a tiny bit more weight to absorb some recoil. However, it does make you feel less cheap when you’re at the range sighting in next to a Howa or a Remmy 700.
Already equipped with Weaver-style bases, the rifle is ready to mount your favourite scope too. It seems the bases are loctited too, as after over 50 rounds, these didn’t work loose. It’s also worth pointing out that the drop on the stock is pretty near perfect, lining you up nicely with a low-mounted scope.

It’s not all candy floss and daisies

It would be great to say we’ve found the cheapest, bestest rifle in the world. But you know how it goes. Cheap, accurate, reliable – choose two.

There are some aspects to the rifle that don’t float my boat, but at the incredibly low price, these are things I can generally handle. This rifle will end up being a good short-range (100 – 300 yards) shooter, for taking out goats, pigs or deer that present themselves nicely. It won’t be my go-to rifle, nor will it be my trusty long-range shooter.

Here are some of the detractors, which limit the rifle’s appeal in my opinion. Some of these are down to cheaper manufacturing, and can be expected.

It’s noisy. The ATR has a flimsy plastic stock that is hollow. If you knock the butt of the rifle, it lets out a hollow clunk. When you close the bolt you can hear it riding over the plastic follower and the bolt handle lets out another hollow-sounding tone when closed against the side of the stock.
The floor metal is… plastic. If you go for the walnut stock, you’ll get proper floor metal. However, the synthetic version comes with plastic moulded sling mounts, trigger guard and blind-magazine floor plate, I say floor plate, but it is completely sealed and inaccessible from the bottom of the rifle. This will all limit your ability to swap out the stock at a later date (without buying floor metal), and may interfere with some mounted accessories, such as bipods.
The recoil is dramatic. The 7mm-08 is not known to be a heavy recoiling round, however, with no mass to absorb the backward motion of the action, most of that recoil is going straight into your shoulder. Even with the inch-thick recoil pad equipped, there was noticeable kick. I did have a light grip on the fore of the rifle on the first shot I took, and after copping a scope to the face, I quickly tightened up my grip to arrest the rearward motion of the firearm. The walnut stocked version will probably deal with this recoil more appropriately.
The look of it. To be honest, it’s not that bad, and as mentioned above, the fluted barrel helps in the looks department. However, the obnoxious Mossberg branding on the bolt looks like lipstick on a pig. Without it, it would look like a good, basic rifle. Rather than a tarted-up cheapy.

The Mossberg's floor metal - or lack thereof. — The Mossberg’s floor metal – or lack thereof.

Accuracy and the deal-breaker

I decided to test this basic hunting rifle with basic hunting loads. A week ago I took a drive down to Waiuku Pistol Club and spent some time on the 100 yard range testing out the following cartridges:

Winchester 140 gr Super-X Power Point
Remington 140 gr Express Core-Lokt
Highland AX 140 gr SPBT
Hornady 139 gr American Whitetail

I have read a few other reviews on this rifle, and note that one reviewer achieved sub-minute groups with some expensive ammo, while another was happy enough with his 2+ MOA groups.

A good sampling of 7mm-08 hunting ammo was used for breaking in and sighting in.

This is the realm my rifle was printing in. The average group size across all four brands (3-shot groups) was 2.53 MOA. Surprisingly, the budget brand Highland AX achieved the best groups, just over 2 MOA, while Winchester (favoured by many 7mm-08 shooters) achieved just under 3 MOA.

At the end of the day, a 2 or 3 MOA rifle at this price is about what you would expect, and is still delivering consistent kill shots out to 300 yards (if you’re using a load closer to the 2 MOA range).

And I could forgive many aspects of this rifle’s construction if it ended there. The very tilty magazine follower, the hollow stock, the spartan looks and short length-of-pull.

All of this could be forgiven, if the barrel fouled a little during break in.

Barrel with no fouling

I know breaking in a rifle barrel is an oft-debated topic, but here it is, I do practice barrel break-in, especially for cheaper rifles, which stand to gain the most from a bit of polishing in the bore to relieve some rough machining. The process I use has nothing to do with achieving X amount of shots, cleaning in between each Y amount of shots. Rather, I take a similar approach to what Nathan Foster describes here. Visually inspecting for copper fouling, and masking sure you are getting a nice, slow build up, which will help maintain accuracy over a decent amount of shots, before fouling becomes excessive.

Two things that can indicate poor barrel manufacturing are excessive fouling after each shot, or no fouling at all. The latter is what I experienced with the ATR. After putting through 51 rounds, not a single trace of copper was seen. Plenty of powder residue, but no hint of the lands hugging the bullet enough to produce some slight copper swaging.

What does this mean? The bore is slightly over-sized. So slight, almost imperceptible. But it makes a massive difference. This barrel will never achieve a sweet spot after a few fouling rounds. The first clean shot will always be the best, and it will only go downhill from there until it is cleaned. Not only this, but the wear on the lands will mean that it has a greatly reduced barrel life, maybe 5 – 20% of what you would expect from your average barrel.

I’m certainly not saying that every ATR is like this. I am saying that this one is. While yours may be great, mine is a shocker. It will be good enough for casual goat hunts, where you might be using between 2 and 10 rounds in a trip. It will probably be good enough for at least a dozen or so trips like this. However, after this, the gun will rapidly start to lose accuracy and usefulness. Not having an action worth re-barrelling, in a few years, this particular rifle will not be worth much at all. However, given the price I paid for it, I feel like I will have achieved sufficient use out of this firearm in that time to justify the expense (and then some).

It’s also been a treat to be able to buy a cheap rifle simply to try out the 7mm-08 calibre. A more thorough review of the ammo used will be coming up soon.

Final thoughts?

If you want a cheap shooter in a new calibre, something to throw on the quad to take around the farm, or an inexpensive bush gun that can take some knocks, the All Terrain Rifle lives up to its name. If you’re under any allusions as to buying cheap and shooting 1/3 MOA groups all day, think again. You may luck out and get a great barrel, you may not.

At the end of the day, the rifle is worth every cent you pay for it, and a little bit more.

Rifle resources

October 17, 2015October 17, 2015 Geoff Leave a comment

There are so many places around the web that you can visit to become more informed about your chosen shooting sport or firearm. However, some resources stand head-and-shoulders above the rest. Here’s a quick break-down of great places to to do a bit of digging.

Cartridge research and long-range accuracy

Terminal Ballistics is not only the home of Matchgrade Bedding Compound, but is also a wealth of knowledge when it comes to… well… terminal ballistics. The study of terminal ballistics is the study of what a bullet does once it impacts the target.

Nathan Foster does a lot of wound research and load development to help shooters figure out which cartridges will suit their desired application. If you’re thinking of trying out a new calibre, this is a great place to start.

Terminal Ballistics also provides long-range shooting advice, both on the web, and in books and other media. If you’re interested in hunting or target-shooting at extended ranges, make sure to give these a go.

Community opinion

Sometimes what you really want to know, is what other users think of a product. Sites like The Gun Rack provide product reviews and other useful information, but if you’d like to get a variety of opinions or start a poll on a certain subject, a forum may be the best place to do that.

In New Zealand we have nzrimfire.com, fishnhunt.co.nz, nzhuntingandshooting.co.nz and many, many more. Often you’ll find that forum members are across multiple sites, and you’ll soon figure out who really knows their stuff.

Advice on reloading and other topics is plentiful on online forums.

Technical reviews

While I try and provide thorough reviews from a user’s point of view, sometimes what you want is a very technical investigation into a certain issue.

A website you can’t look past is precisionrifleblog.com. Full of comprehensive tests and healthily objective comparisons, this is a site that I could get lost on for hours (and sometimes have).

Services

Some of the services that rifle shooters need are just not advertised in the way makeup or used cars are. To find out where to get your stock repaired or get a barrel threaded, you probably shouldn’t rely on Google.

Theirs no better resource for this than your fellow shooters. Aside from checking out forums, or the other resources listed above, joining a hunting or shooting club is an invaluable way to make contacts in the community/industry, and find out where your local gunsmith or hunting spots might be hidden.

Rifle stock bedding and finishing: Part 1

October 14, 2015October 14, 2015 Geoff 5 Comments

Properly bedding and finishing your rifle will not only help it look a million bucks, but will seriously enhance your accuracy as well. In this blog series I’ll be looking at bedding and finishing my Boyds Prairie Hunter stock for my Swedish Mauser.

The stock

The stock I’ve chosen for my small ring Husqvarna chambered in 6.5×55 is a laminate from Boyds Gunstocks, in their Prairie Hunter shape with a nutmeg finish. The stock has more weight than my current one, absorbing some more recoil, but also balancing well against the almost half a kilo of suppressor on the other end. It also has a more appropriate length of pull, and a nice recoil pad that not only reduces kick, but also gives me that little bit of extra length.

This stock has been provided with a few nice extras, including an adjustable comb and synthetic pistol grip and forend caps.

The Boyds stock and BOLD Trigger made a nice car package to come home to. — The Boyds stock and BOLD Trigger made a nice care package to come home to.

For some stocks, Boyds only provides their products unfinished, which is the case here. This is because some rifles come in so many variations of configuration, that they will necessarily require some fitting by the user. In this case it’s differences in bolt handle that make it a must for users to complete their own stock. Many older Mausers still have their straight bolt handles, but increasingly if you come across an old Swede, the bolt handle will be bent back, or you could even have an M38 bolt – or similar – which comes turned down from the factory.

After finishing this, and any other inletting adjustments needed, you can then apply your choice of protective coating. While Boyds recommends a polyurethane, I really like the hand-rubbed oil look, so that’s what I’ll be trying with this project. My Pro Varmint stock from Boyds does have the polyurethane finish from the factory, and I must admit, it looks good and is very hard-wearing. But hey, since I’m doing this bit myself, I may as well try something different.

The bedding compound

There are various bedding compounds and systems on the market, and you have some serious research and decision-making to do. Some newer factory rifles will come with an aluminium bedding block, while others are pillar-bedded.

Rifles that are bedded after the fact can be done in several ways, depending on your capability, tools, budget (if your smith is doing it), desired application and the needs of your rifle’s action.

Terminal Ballistics Matchgrade Bedding Compound - release agent, component A and component B. — Terminal Ballistics Matchgrade Bedding Compound – release agent, component A and component B.

Generally people choose between pillar or glass bedding, or both. Then there’s also a full, front or front-and-rear glass bedding job. Pillar bedding uses metal pillars, such as aluminium or stainless steel, to eliminate the risk of compression or crush when tightening the king screws.

The pillars are tubes that are epoxied in the action screw holes, for the screws to go through. This way, when the wood expands and contracts, or is put under pressure between the floor metal and action, the screws can always be done up to the same point, as the metal is pretty much impervious to these stresses.

Glass bedding is the process of using a compound, that is pretty much an epoxy in most cases, that is reinforced in a fibreglass-like way. The compound I prefer is Nathan Foster’s Matchgrade Bedding Compound, which is steel reinforced, and easy to apply.

Check back in for Part 2, where I’ll go over the first steps of the stock prep and bedding process.

Author: Geoff

Swiss 300 metre shoot – Any Sights Any Rifle

An enjoyable shoot

The format

The experience